Campus Valla, Linköping
TMC

Quick facts
- Year Built: 2012
- Architect: x
- Address: Campus Valla, Johannes Magnus väg 9
- Facility ID: E0007049
- Property Designation: Intellektet 1
General information
Construction completed at the end of 2012.
Campus Valla, Linköping
Construction completed at the end of 2012.
Generally
In order to obtain good air quality in the premises, the ventilation is adapted to the number of people and the equipment planned for the rooms. To provide heat and prevent frostbite, there are radiators located along facade walls.
Office
The air supply in offices takes place automatically with a variable flow dependent on temp and co2 in the premises
In the offices, the normal temperature can be somewhat influenced via a room regulator inside the door.
Meeting room
The house can be ventilated overtime via a push button on the wall in the entrance. This function is possible during non-ordinary working hours.
After regular office hours, i.e. evenings and weekends, the ventilation in the building is sometimes turned off to save energy.
Car parking
Parking spaces intended for vehicles with a handicap permit can be found close to the main entrance. Please see Campus map.
Entrances and lifts
The entrances are accessible and all floors can be reached via lift.
RWC and rest room
Toilets adapted for the disabled are available on each floor. In rest rooms and at the RWC there are security alarms with red push buttons labeled "emergency signal". Alarms are indicated locally by sound and a red flashing light outside each room. It is important that you who see and hear this alarm contact the person concerned who needs help. The security alarm is forwarded to reception during the day. Alarms are reset inside each room by pressing the reset button.
SCARED - WARN - ALARM - EXTINGUISH
• save yourself and others around you, but don't take too many risks yourself
• warn others who may be in danger
• alert the Emergency Services by calling 112
• put out the fire if possible
Automatic fire alarm
Evacuation alarms in case of fire are triggered via smoke detectors placed in escape routes, technical spaces and in spaces where many people gather. Triggered alarm, i.e. signal to evacuate, given via bell throughout the house and red flashing light in parts of the house.
Triggered alarms go to SOS and Akademiska Hus, otherwise call 112. Limit the source of the fire by closing windows and doors.
You can manually trigger the evacuation alarm using push buttons in connection with the escape routes.
Fire cells
The building is divided into a number of fire cells to prevent fire and smoke from spreading.
Each fire cell is delimited by fire-rated walls and doors. In principle, all floors, stairwells, lifts, operating areas and waste rooms have their own fire cells. Doors in fire cell boundaries can be magnetically suspended in the open position for transport and closed manually with a push button marked "fire door closer". When an evacuation alarm is triggered, the doors close automatically within the alarmed area.
Doors in fire compartment boundaries must absolutely not be blocked by wedges or the like!
Escape routes / Assembly point
See evacuation plans in corridors.
The stairwells form independent escape routes. Two stairwells can be reached from each workplace. The escape routes, which are marked with green luminous escape signs, must never be blocked. The green signs are always lit and have a battery backup to illuminate even in the event of a power cut.
If the fire alarm is triggered, all personnel must leave the building, close all doors behind them and gather at the assembly point (See the respective evacuation plan). The staff reports there to the evacuation recipient and leaves their name and group affiliation or equivalent. No one may depart from the assembly point until this is done.
Group room
Luminaires in the ceiling can be dimmed
Lighting in toilets is controlled locally with motion detectors.
Lighting in corridors and stairwells are presence controlled between 10%-100% brightness
Office
In offices, the lighting is turned on and off manually via a push button inside the door.
Pull switch office
To switch off or dim office luminaires, the pull switch on the luminaire is used. Turn on and off with two short pulls and adjust the light with a long pull.
LAB
In the lab, the lighting is controlled by time channel, push buttons and presence, but also for scenarios on touch screens in the OP
Office paper, newspapers and magazines are sorted locally in the house.
Tenants themselves are responsible for source sorting
The tenant is responsible for removing bulky waste, pallets and packaging.